{"id":483,"date":"2019-08-28T15:06:35","date_gmt":"2019-08-28T20:06:35","guid":{"rendered":"https:\/\/robotsbench.com\/?p=483"},"modified":"2021-11-29T12:37:53","modified_gmt":"2021-11-29T17:37:53","slug":"best-soldering-helping-hands-and-other-circuit-board-holders","status":"publish","type":"post","link":"https:\/\/robotsbench.com\/best-soldering-helping-hands-and-other-circuit-board-holders\/","title":{"rendered":"Best Soldering Helping Hands (and other circuit board holders)"},"content":{"rendered":"<div class=\"affiliate-disclaimer\">I hope that the products recommended here will help you build great projects. Just so you know, if you buy through the links on this page on Amazon or Banggood (among others), RobotsBench may get a small share of the sale (as an Amazon affilate, I earn from qualifying purchases). This helps to keep the site alive and allow me to write more articles. Thank you!<\/div>\n<p><strong>TLDR; The <a href=\"https:\/\/amzn.to\/2Hr7tVc\">PanaVise 350 Multi-Purpose Work Center<\/a> is a great step up the traditional helping hands for soldering circuit boards and will hold PCB of most sizes. On the other hand, if you want a tool that can also handle other tasks like holding two wires close together, the <a href=\"https:\/\/amzn.to\/2Ztv2mK\">QuadHands WorkBench Helping Hands<\/a> is the best option.<\/strong><\/p>\n\n\n\n<p>After a few soldering jobs, you&#8217;ll be looking for a holder and other soldering tools to help you for your electronic repair and circuit building work. Soldering circuits boards is often literally a balancing act: you&#8217;ll want to work at various angles to reach parts, and at some point you&#8217;ll feel like you don&#8217;t have enough hands to hold a small part, <a href=\"https:\/\/robotsbench.com\/best-soldering-iron-for-electronics-reviewed\/\">a soldering iron<\/a> , solder and a PCB. <\/p>\n\n\n\n<p>That&#8217;s where a helping hand comes in to hold a few things for you. You&#8217;ll probably accumulate many of those tools over time, but even the cheapest one beats having to balance the board on your work table and try to quickly make things stick together.<\/p>\n\n\n\n<p>There are many designs for helping hands, usually involving alligator clips. Circuits boards are also a good alternative to hold the circuit at a good angle to solder, and can be used alone or in combination with a helping hand. Helping hands or holders are also useful to hold the circuit in place while doing some diagnostic on it.<\/p>\n\n\n\n<p>Another useful feature is a magnifying glass. I prefer to have a separate magnifying glass and holder, but if your space is limited and you&#8217;re only doing soldering a combo can also be a great option.<\/p>\n\n\n\n<p>Here are the best soldering helping hands and board holders to help you hold your PCBs:<\/p>\n\n\n\n<ul><li><a href=\"https:\/\/amzn.to\/2ZsHLKj\">Pro&#8217;sKit 900-015 Helping Hands<\/a><\/li><li><a href=\"https:\/\/amzn.to\/2Ztv2mK\">QuadHands WorkBench Helping Hands<\/a><\/li><li><a href=\"https:\/\/amzn.to\/2KUPo44\">WEmake Soldering Station with LED Illuminated Magnifying Lens and 3rd Helping Hand<\/a>                                                                                                                               <\/li><li><a href=\"https:\/\/amzn.to\/2Zpawsp\"><\/a><a href=\"https:\/\/amzn.to\/2Zpawsp\">QuadHands Flip Circuit Board Holder<\/a>                                                                                                                           <\/li><li><a href=\"https:\/\/amzn.to\/2KVTWqT\">PanaVise Model 201 &#8220;Junior&#8221; Miniature Vise <\/a><\/li><li><a href=\"https:\/\/amzn.to\/2Hr7tVc\">PanaVise 350 Multi-Purpose Work Center<\/a>                                                                                                                              <\/li><\/ul>\n\n\n\n<p>You&#8217;ll probably accumulate many of those tools over time, but even the cheapest one beats having to balance the board on your work table and try to quickly make things stick. <\/p>\n\n\n\n<h2> Classic helping hands: <a href=\"https:\/\/amzn.to\/2ZsHLKj\">Pro&#8217;sKit 900-015 Helping Hands<\/a> <\/h2>\n\n\n\n<div class=\"azp-product-area azp-box-style \">\n    \n\n            <!-- azp-each-product -->\n        <div class=\"azp-each-product azp-each-box azp_box_item_1\">\n\n            <!-- azp-product-meta -->\n                        <!-- \/.azp-product-meta -->\n\n            <!-- azp--product-content -->\n            <div class=\"azp-product-content\">\n                <!-- azp-visual-part -->\n                <div class=\"azp-visual-part\">\n                    <div class=\"azp-img-wrapper\">\n\t\t\t            <a  class=\"azp-url azp_image_link\" rel=\"noopener nofollow\" target=\"_blank\" href=\"https:\/\/www.amazon.com\/dp\/B002PIA6Z4?tag=robbench-20&linkCode=ogi&th=1&psc=1\">\n    <img alt=\"Pro'sKit 900-015 Helping...image\" src=\"https:\/\/m.media-amazon.com\/images\/I\/41hE8aKpakL._SL160_.jpg\"\/>\n<\/a>\n                    <\/div>\n                <\/div>\n                <!-- \/.azp-visual-part -->\n\n                <!-- description -->\n                <div class=\"azp-info-part\">\n                    <div class=\"azp-title\">\n\t\t\t\t        <a target=\"_blank\" rel=\"noopener nofollow\" class=\"azp-url\" href=\"https:\/\/www.amazon.com\/dp\/B002PIA6Z4?tag=robbench-20&linkCode=ogi&th=1&psc=1\" title=\"Pro'sKit 900-015 Helping Hands Soldering Aid\">\n    Pro'sKit 900-015 Helping Hands Soldering Aid<\/a>\n                    <\/div>\n                    <div class=\"azp-feature-list\">\n\t\t\t            <ul class=\"azp-feature\">\n            <li>Two Alligator Style Clips To Hold Your Components In Place<\/li>\n            <li>Weighted Base To Keep Unit Upright<\/li>\n            <li>Several Points Of Adjustments<\/li>\n            <li>Item Package Dimension: 5.0\" L X 3.5\" W X 2.5\" H<\/li>\n    <\/ul>                    <\/div>\n                    <div class=\"box-footer\">\n                        \t                        \n<div class=\"azp-price\">\n            <span class=\"azp-real-price\">\n        $18.19<\/span>\n        <span class=\"azp-off\">-$4.86<\/span>\n        <span class=\"azp-recent-price\">$13.33<\/span>\n    <\/div>\n                                                <div class=\"azp-buy-button\">\n\t\t                    <a  href=\"https:\/\/www.amazon.com\/dp\/B002PIA6Z4?tag=robbench-20&linkCode=ogi&th=1&psc=1\"  class=\"azp-url azp_button_url azp_button_type_image\" >\n            <img src=\"https:\/\/robotsbench.com\/wp-content\/plugins\/azonpress\/public\/images\/amazon_buttons\/custom_1.png\" title=\"Buy On Amazon\" \/>\n    <\/a>                        <\/div>\n                    <\/div>\n                <\/div>\n                <!-- description -->\n\n            <\/div>\n            <!-- \/.azp-product-content -->\n\n        <\/div>\n        <!-- \/.azp-each--product -->\n                <\/div>\n<!-- \/.azp-product-area -->\n\n\n\n\n<p>The original helping hands with standard alligator clips, which can be adjusted to hold on at various angles. There are some models of this that comes with a tiny magnifier, but they&#8217;re too small to be useful and often end up being in the way instead. You&#8217;re better off with a dedicated magnifier, or with a soldering station with a nice, big magnifier.<\/p>\n\n\n\n<p>They&#8217;re not perfect: it&#8217;s mostly useful for small boards, since the base can easily tip when the board is too heavy. You also have to be careful so you don&#8217;t dent the PCB with the alligator clips. Given the low cost, it&#8217;s still a good tool to have in your toolbox in case when you need a little extra help. <\/p>\n\n\n\n<h2>Best soldering helping hands: <a href=\"https:\/\/amzn.to\/2Ztv2mK\">QuadHands WorkBench Helping Hands<\/a> <\/h2>\n\n\n\n<div class=\"azp-product-area azp-box-style \">\n    \n\n            <!-- azp-each-product -->\n        <div class=\"azp-each-product azp-each-box azp_box_item_1\">\n\n            <!-- azp-product-meta -->\n                        <!-- \/.azp-product-meta -->\n\n            <!-- azp--product-content -->\n            <div class=\"azp-product-content\">\n                <!-- azp-visual-part -->\n                <div class=\"azp-visual-part\">\n                    <div class=\"azp-img-wrapper\">\n\t\t\t            <a  class=\"azp-url azp_image_link\" rel=\"noopener nofollow\" target=\"_blank\" href=\"https:\/\/www.amazon.com\/dp\/B01MTWLF2Q?tag=robbench-20&linkCode=ogi&th=1&psc=1\">\n    <img alt=\"QuadHands Workbench |...image\" src=\"https:\/\/m.media-amazon.com\/images\/I\/41+JZb76URL._SL160_.jpg\"\/>\n<\/a>\n                    <\/div>\n                <\/div>\n                <!-- \/.azp-visual-part -->\n\n                <!-- description -->\n                <div class=\"azp-info-part\">\n                    <div class=\"azp-title\">\n\t\t\t\t        <a target=\"_blank\" rel=\"noopener nofollow\" class=\"azp-url\" href=\"https:\/\/www.amazon.com\/dp\/B01MTWLF2Q?tag=robbench-20&linkCode=ogi&th=1&psc=1\" title=\"QuadHands Workbench | Helping Hands Soldering Stations | Soldering Iron Helping Hand Tool with 4 Magnetic Arms | Designed for Soldering Tools | Steel Base for Welding Table Top with Locking Grips\">\n    QuadHands Workbench | Helping Hands Soldering Stations | Soldering Iron Helping Hand Tool with 4 Magnetic Arms | Designed for Soldering Tools | Steel Base for Welding Table Top with Locking Grips<\/a>\n                    <\/div>\n                    <div class=\"azp-feature-list\">\n\t\t\t            <ul class=\"azp-feature\">\n            <li>When You Need a Hand: Place the flexible and adjustable Quadhands gooseneck arms anywhere on the magnetic plate. Clamp a project (circuits, jewelry, hobby model) securely in place so you can solder, paint or repair with precision. Work smarter not harder!<\/li>\n            <li>Strong Magnetic Arms: Freely connect 4 magnetic, adjustable 16\u201d and 8\u201d arms to the plate. Clip your project to the 360\u00b0 rotating alligator clamps and lock using thumb nuts. Then move, rearrange and position to keep them steady so you work with accuracy.<\/li>\n            <li>Weighted Base: Rubber feet keep the large powder coated steel 6\u201d x 9\u201d heavy base from sliding and stable. Wherever you stick the arms - the base provides a strong magnetic attraction, making sure your project stays put so you work with precision!<\/li>\n            <li>Innovative Flex Design: Free your hands! QuadHands Workbench kit is the perfect work station assistant. Heat resistant arms allow you to steadily use a soldering iron for prolonged periods of time and can even be used when working on machinery or cars.<\/li>\n            <li>Satisfaction Guarantee: QuadHands is engineered to last and designed to provide a third hand right where you need it. Made in the USA, we offer a lifetime satisfaction guarantee. Not happy with a product? We will repair, replace or refund your money.<\/li>\n            <li>Flexible and Adjustable Arms: Equipped with two 16-inch and two 8-inch arms, featuring flexible metal gooseneck design and stainless steel alligator clips for versatile positioning.<\/li>\n            <li>Designed and Made in the USA: Proudly designed, tested, and built in America, ensuring top-notch quality and supporting local manufacturing.<\/li>\n            <li>Perfect for Engineers and Artists: An essential tool for anyone needing precision and stability, from engineers to artists and hobbyists.<\/li>\n            <li>Non-Scratch Rubber Feet: The base is lined with rubber to protect work surfaces from scratches and scuffs, maintaining your workspace's integrity.<\/li>\n            <li>Versatile Use for Various Projects: Ideal for electronics, soldering, crafting, painting, and detailed hobby work, providing stability and precision.<\/li>\n    <\/ul>                    <\/div>\n                    <div class=\"box-footer\">\n                        \t                        \n<div class=\"azp-price\">\n            <span class=\"azp-recent-price\">\n            $49.95        <\/span>\n    <\/div>\n                                                <div class=\"azp-buy-button\">\n\t\t                    <a  href=\"https:\/\/www.amazon.com\/dp\/B01MTWLF2Q?tag=robbench-20&linkCode=ogi&th=1&psc=1\"  class=\"azp-url azp_button_url azp_button_type_image\" >\n            <img src=\"https:\/\/robotsbench.com\/wp-content\/plugins\/azonpress\/public\/images\/amazon_buttons\/custom_1.png\" title=\"Buy On Amazon\" \/>\n    <\/a>                        <\/div>\n                    <\/div>\n                <\/div>\n                <!-- description -->\n\n            <\/div>\n            <!-- \/.azp-product-content -->\n\n        <\/div>\n        <!-- \/.azp-each--product -->\n                <\/div>\n<!-- \/.azp-product-area -->\n\n\n\n\n<p>Lots and lots of hands here, and some of the bigger models have even more of them. The base doesn&#8217;t look like it, but it has one of the heaviest base at 4 pounds: with the rubber feet, it nice and sturdy and won&#8217;t move while you work with the multiple arms.<\/p>\n\n\n\n<p>Depending on the size of your project, you&#8217;ll also have an extra arm or two that&#8217;s not holding the PCB that you can use for other jobs compared to the cheap helping hands with only two clips. The arms themselves can be adjusted to hold the circuit at various angles and can be moved on the base. The clips rotate, and they also come with a silicon cover to protect your PCB while still holding on tight. <\/p>\n\n\n\n<p>Like other helping hands, they&#8217;re also useful for working on other jobs, not only holding circuits.<\/p>\n\n\n\n<h2>Best soldering station with helping hands: <a href=\"https:\/\/amzn.to\/2KUPo44\">WEmake Soldering Station with LED Illuminated Magnifying Lens and 3rd Helping Hand<\/a>        <\/h2>\n\n\n\n<div class=\"azp-product-area azp-box-style \">\n    \n\n            <!-- azp-each-product -->\n        <div class=\"azp-each-product azp-each-box azp_box_item_1\">\n\n            <!-- azp-product-meta -->\n                        <!-- \/.azp-product-meta -->\n\n            <!-- azp--product-content -->\n            <div class=\"azp-product-content\">\n                <!-- azp-visual-part -->\n                <div class=\"azp-visual-part\">\n                    <div class=\"azp-img-wrapper\">\n\t\t\t            <a  class=\"azp-url azp_image_link\" rel=\"noopener nofollow\" target=\"_blank\" href=\"https:\/\/www.amazon.com\/dp\/B00Y4QPW9U?tag=robbench-20&linkCode=ogi&th=1&psc=1\">\n    <img alt=\"WEmake Soldering Station...image\" src=\"https:\/\/m.media-amazon.com\/images\/I\/41WWBMZq6-L._SL160_.jpg\"\/>\n<\/a>\n                    <\/div>\n                <\/div>\n                <!-- \/.azp-visual-part -->\n\n                <!-- description -->\n                <div class=\"azp-info-part\">\n                    <div class=\"azp-title\">\n\t\t\t\t        <a target=\"_blank\" rel=\"noopener nofollow\" class=\"azp-url\" href=\"https:\/\/www.amazon.com\/dp\/B00Y4QPW9U?tag=robbench-20&linkCode=ogi&th=1&psc=1\" title=\"WEmake Soldering Station with LED Illuminated Magnifying Lens and 3rd Helping Hand\">\n    WEmake Soldering Station with LED Illuminated Magnifying Lens and 3rd Helping Hand<\/a>\n                    <\/div>\n                    <div class=\"azp-feature-list\">\n\t\t\t            <ul class=\"azp-feature\">\n            <li>3 HELPING HANDS with alligator clips for securely gripping your work<\/li>\n            <li>INTEGRATED LED illuminated 3X-90mm-Magnifying glass makes for easier soldering<\/li>\n            <li>SEE YOUR WORK CLEARLY and get those fine solder joints perfect<\/li>\n            <li>Solder spool brackets - INCLUDED<\/li>\n            <li>SOLDERING iron holder- INCLUDED<\/li>\n            <li>Cleaning sponge & brass tip cleaner - INCLUDED<\/li>\n            <li>Solder Flux - INCLUDED<\/li>\n            <li>Solder and soldering iron not included<\/li>\n    <\/ul>                    <\/div>\n                    <div class=\"box-footer\">\n                        \t                        \n<div class=\"azp-price\">\n            <span class=\"azp-real-price\">\n        $60.25<\/span>\n        <span class=\"azp-off\">-$15.54<\/span>\n        <span class=\"azp-recent-price\">$44.71<\/span>\n    <\/div>\n                                                <div class=\"azp-buy-button\">\n\t\t                    <a  href=\"https:\/\/www.amazon.com\/dp\/B00Y4QPW9U?tag=robbench-20&linkCode=ogi&th=1&psc=1\"  class=\"azp-url azp_button_url azp_button_type_image\" >\n            <img src=\"https:\/\/robotsbench.com\/wp-content\/plugins\/azonpress\/public\/images\/amazon_buttons\/custom_1.png\" title=\"Buy On Amazon\" \/>\n    <\/a>                        <\/div>\n                    <\/div>\n                <\/div>\n                <!-- description -->\n\n            <\/div>\n            <!-- \/.azp-product-content -->\n\n        <\/div>\n        <!-- \/.azp-each--product -->\n                <\/div>\n<!-- \/.azp-product-area -->\n\n\n\n\n<p>This is an all in one solution for soldering with a usable magnifier, a lamp and helping hands. It also includes holders for your soldering iron, solder spool, brass tip cleaner and cleaning sponge: you only need a soldering iron and some solder and you&#8217;re ready to This is an all in one solution for soldering with a usable magnifying glass (held with a large gooseneck arm), a led lamp and helping hands. <\/p>\n\n\n\n<p>It also includes a soldering iron holder, a solder spool, a brass tip cleaner and a cleaning sponge: you only need a soldering iron and some solder and you&#8217;re ready to go.<\/p>\n\n\n\n<p>The base has a nice weight so it won&#8217;t tip over, and all the tools are of a good quality. The only shame is that the LED lamp doesn&#8217;t come with the adapter in the box, but you can also power it with batteries.<\/p>\n\n\n\n<p>I prefer individual tools over an all in one solution because I don&#8217;t only solder PCB with them (and I already have those tools separately), but if you&#8217;re just getting started or want a soldering station that&#8217;s compact but functional it&#8217;s a good purchase.<\/p>\n\n\n\n<h2> Best flip circuit holder: <a href=\"https:\/\/amzn.to\/2Zpawsp\">QuadHands Flip Circuit Board Holder<\/a> <\/h2>\n\n\n\n<div class=\"azp-product-area azp-box-style \">\n    \n\n            <!-- azp-each-product -->\n        <div class=\"azp-each-product azp-each-box azp_box_item_1\">\n\n            <!-- azp-product-meta -->\n                        <!-- \/.azp-product-meta -->\n\n            <!-- azp--product-content -->\n            <div class=\"azp-product-content\">\n                <!-- azp-visual-part -->\n                <div class=\"azp-visual-part\">\n                    <div class=\"azp-img-wrapper\">\n\t\t\t            <a  class=\"azp-url azp_image_link\" rel=\"noopener nofollow\" target=\"_blank\" href=\"https:\/\/www.amazon.com\/dp\/B073G95GRF?tag=robbench-20&linkCode=ogi&th=1&psc=1\">\n    <img alt=\"QuadHands Flip Circuit...image\" src=\"https:\/\/m.media-amazon.com\/images\/I\/51GS1LLDpEL._SL160_.jpg\"\/>\n<\/a>\n                    <\/div>\n                <\/div>\n                <!-- \/.azp-visual-part -->\n\n                <!-- description -->\n                <div class=\"azp-info-part\">\n                    <div class=\"azp-title\">\n\t\t\t\t        <a target=\"_blank\" rel=\"noopener nofollow\" class=\"azp-url\" href=\"https:\/\/www.amazon.com\/dp\/B073G95GRF?tag=robbench-20&linkCode=ogi&th=1&psc=1\" title=\"QuadHands Flip Circuit Board Workbench Holder | Soldering Helping Third Hand Tool And Repair Kit | Rotate PCB Board 360 Degrees | Stainless Steel Sturdy Base | For Large &amp; Small Boards | USA\">\n    QuadHands Flip Circuit Board Workbench Holder | Soldering Helping Third Hand Tool And Repair Kit | Rotate PCB Board 360 Degrees | Stainless Steel Sturdy Base | For Large & Small Boards | USA<\/a>\n                    <\/div>\n                    <div class=\"azp-feature-list\">\n\t\t\t            <ul class=\"azp-feature\">\n            <li>WHEN YOU NEED A HAND: QuadHands Flip PCB Holder is the ultimate tool and electronic vise. When you need a third hand it holds a circuit board so you can work on both sides with ease. Place heavy, bulky boards so you can work smarter not harder!<\/li>\n            <li>STRONG GRIP: Set the desired width and insert and remove boards from the secure spring loaded holder. Boards 12\u201d wide can rotate and flip 10\u201d high and 360\u00b0 without repositioning. Simply turn with one hand to make soldering iron and desoldering a breeze.<\/li>\n            <li>INNOVATIVE DESIGN: Free your hands! The workbench kit is the perfect work station. Isolates tiny to large circuits from the base while the v-groove holds boards with different thicknesses so you can repair projects that require extreme accuracy.<\/li>\n            <li>WEIGHTED BASE: A heavy powder coated steel base with rubber feet won\u2019t slip, tip over, slide or move an inch while you work on your project at your desk or bench. The covered feet also protect your work space's surfaces from scratching and scuffing.<\/li>\n            <li>SATISFACTION GUARANTEE: QuadHands is engineered to last and designed to provide a third hand right where you need it. Made in the USA, we offer a lifetime satisfaction guarantee. Not happy with a product? We will repair, replace or refund your money.<\/li>\n    <\/ul>                    <\/div>\n                    <div class=\"box-footer\">\n                        \t                        \n<div class=\"azp-price\">\n            <span class=\"azp-recent-price\">\n                    <\/span>\n    <\/div>\n                                                <div class=\"azp-buy-button\">\n\t\t                    <a  href=\"https:\/\/www.amazon.com\/dp\/B073G95GRF?tag=robbench-20&linkCode=ogi&th=1&psc=1\"  class=\"azp-url azp_button_url azp_button_type_image\" >\n            <img src=\"https:\/\/robotsbench.com\/wp-content\/plugins\/azonpress\/public\/images\/amazon_buttons\/custom_1.png\" title=\"Buy On Amazon\" \/>\n    <\/a>                        <\/div>\n                    <\/div>\n                <\/div>\n                <!-- description -->\n\n            <\/div>\n            <!-- \/.azp-product-content -->\n\n        <\/div>\n        <!-- \/.azp-each--product -->\n                <\/div>\n<!-- \/.azp-product-area -->\n\n\n\n\n<p>It&#8217;s not a helping hand, but a circuit holder is a good alternative to free you up by holding up the circuit for you. This is the simplest kind of circuit board holder: it simply holds down the board (up to 12 inches wide, or 10 inch if you want to be able to flip it without taking it off) and swivels 360 degrees. <\/p>\n\n\n\n<p>It&#8217;s not as versatile as the other tools here since this is only useful for soldering circuit boards, but it&#8217;s good at what it does. There are some cheaper flip holders than this one, but the QuandHands is a lot more stable and easier to adjust. <\/p>\n\n\n\n<h2>Best budget circuit holder: <a href=\"https:\/\/amzn.to\/2KVTWqT\">PanaVise Model 201 &#8220;Junior&#8221; Miniature Vise<\/a><\/h2>\n\n\n\n<div class=\"azp-product-area azp-box-style \">\n    \n\n            <!-- azp-each-product -->\n        <div class=\"azp-each-product azp-each-box azp_box_item_1\">\n\n            <!-- azp-product-meta -->\n                        <!-- \/.azp-product-meta -->\n\n            <!-- azp--product-content -->\n            <div class=\"azp-product-content\">\n                <!-- azp-visual-part -->\n                <div class=\"azp-visual-part\">\n                    <div class=\"azp-img-wrapper\">\n\t\t\t            <a  class=\"azp-url azp_image_link\" rel=\"noopener nofollow\" target=\"_blank\" href=\"https:\/\/www.amazon.com\/dp\/B000B61D22?tag=robbench-20&linkCode=ogi&th=1&psc=1\">\n    <img alt=\"PANAVISE Model 201...image\" src=\"https:\/\/m.media-amazon.com\/images\/I\/41YAZmsGlkS._SL160_.jpg\"\/>\n<\/a>\n                    <\/div>\n                <\/div>\n                <!-- \/.azp-visual-part -->\n\n                <!-- description -->\n                <div class=\"azp-info-part\">\n                    <div class=\"azp-title\">\n\t\t\t\t        <a target=\"_blank\" rel=\"noopener nofollow\" class=\"azp-url\" href=\"https:\/\/www.amazon.com\/dp\/B000B61D22?tag=robbench-20&linkCode=ogi&th=1&psc=1\" title=\"PANAVISE Model 201 &quot;Junior&quot; Miniature Vise,Silver \/ Black\">\n    PANAVISE Model 201 \"Junior\" Miniature Vise,Silver \/ Black<\/a>\n                    <\/div>\n                    <div class=\"azp-feature-list\">\n\t\t\t            <ul class=\"azp-feature\">\n            <li>Easy-to-use single knob controls head movement through 3-planes: 210 degree Tilt, 360 Turn & 360 Rotation<\/li>\n            <li>Fine\/coarse adjusting knob controls jaw pressure for delicate work<\/li>\n            <li>Grooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic<\/li>\n            <li>Continuous heat tolerance to 350 F (177 C), intermittent heat up to 450 F (204 C)<\/li>\n    <\/ul>                    <\/div>\n                    <div class=\"box-footer\">\n                        \t                        \n<div class=\"azp-price\">\n            <span class=\"azp-real-price\">\n        $38.95<\/span>\n        <span class=\"azp-off\">-$0.78<\/span>\n        <span class=\"azp-recent-price\">$38.17<\/span>\n    <\/div>\n                                                <div class=\"azp-buy-button\">\n\t\t                    <a  href=\"https:\/\/www.amazon.com\/dp\/B000B61D22?tag=robbench-20&linkCode=ogi&th=1&psc=1\"  class=\"azp-url azp_button_url azp_button_type_image\" >\n            <img src=\"https:\/\/robotsbench.com\/wp-content\/plugins\/azonpress\/public\/images\/amazon_buttons\/custom_1.png\" title=\"Buy On Amazon\" \/>\n    <\/a>                        <\/div>\n                    <\/div>\n                <\/div>\n                <!-- description -->\n\n            <\/div>\n            <!-- \/.azp-product-content -->\n\n        <\/div>\n        <!-- \/.azp-each--product -->\n                <\/div>\n<!-- \/.azp-product-area -->\n\n\n\n\n<p>This small vise is what I use on my bench right now for small soldering projects (it opens up to 2.875 inches) and I&#8217;m pretty satisfied with it. The grooves in the jaws will hold a board just fine and the head can be positioned precisely. It&#8217;s just a shame that one of the claws has only one groove, so you have to turn the board and the jaws instead of just the board.<\/p>\n\n\n\n<p>It&#8217;s pretty stable since base is heavy, more so than a standard helping hand. You can also mount the base to something if it&#8217;s a problem for you. It can also be expanded and improved on with other accessories such as neoprene jaw pads, a speed adjust handle and tray mount to build the perfect vise for your needs. <\/p>\n\n\n\n<p>For me, this is the best budget circuit holder if the size is not a problem for you, since you can reuse if for many other projects, not only soldering boards. It&#8217;s worth paying a bit more, even on a budget, for a tool that you&#8217;ll use all the time for precision work.<\/p>\n\n\n\n<h2>Best large circuit holder: <a href=\"https:\/\/amzn.to\/2Hr7tVc\">PanaVise 350 Multi-Purpose Work Center<\/a><\/h2>\n\n\n\n<div class=\"azp-product-area azp-box-style \">\n    \n\n            <!-- azp-each-product -->\n        <div class=\"azp-each-product azp-each-box azp_box_item_1\">\n\n            <!-- azp-product-meta -->\n                        <!-- \/.azp-product-meta -->\n\n            <!-- azp--product-content -->\n            <div class=\"azp-product-content\">\n                <!-- azp-visual-part -->\n                <div class=\"azp-visual-part\">\n                    <div class=\"azp-img-wrapper\">\n\t\t\t            <a  class=\"azp-url azp_image_link\" rel=\"noopener nofollow\" target=\"_blank\" href=\"https:\/\/www.amazon.com\/dp\/B00011QA0M?tag=robbench-20&linkCode=ogi&th=1&psc=1\">\n    <img alt=\"PANAVISE 350 Multi-Purpose...image\" src=\"https:\/\/m.media-amazon.com\/images\/I\/417yq+kS6LL._SL160_.jpg\"\/>\n<\/a>\n                    <\/div>\n                <\/div>\n                <!-- \/.azp-visual-part -->\n\n                <!-- description -->\n                <div class=\"azp-info-part\">\n                    <div class=\"azp-title\">\n\t\t\t\t        <a target=\"_blank\" rel=\"noopener nofollow\" class=\"azp-url\" href=\"https:\/\/www.amazon.com\/dp\/B00011QA0M?tag=robbench-20&linkCode=ogi&th=1&psc=1\" title=\"PANAVISE 350 Multi-Purpose Work Center\">\n    PANAVISE 350 Multi-Purpose Work Center<\/a>\n                    <\/div>\n                    <div class=\"azp-feature-list\">\n\t\t\t            <ul class=\"azp-feature\">\n            <li>Self-centering, extra-wide opening jaws open a full 9-Inch (228.6mm) and hold heavier objects by centering weight over base<\/li>\n            <li>Parts Tray Base Mount adds stability [8.5 (215.9mm) diameter] and has six individual trays to neatly hold small parts and tools<\/li>\n            <li>Ribbed, neoprene jaw pads are 1.875 (47.6mm) high x 1.5 (38.1mm) wide and provide a sure grip<\/li>\n            <li>Height: 7.875 (200mm), Weight: 5.0 lbs. (2.3kg)<\/li>\n    <\/ul>                    <\/div>\n                    <div class=\"box-footer\">\n                        \t                        \n<div class=\"azp-price\">\n            <span class=\"azp-recent-price\">\n            $89.99        <\/span>\n    <\/div>\n                                                <div class=\"azp-buy-button\">\n\t\t                    <a  href=\"https:\/\/www.amazon.com\/dp\/B00011QA0M?tag=robbench-20&linkCode=ogi&th=1&psc=1\"  class=\"azp-url azp_button_url azp_button_type_image\" >\n            <img src=\"https:\/\/robotsbench.com\/wp-content\/plugins\/azonpress\/public\/images\/amazon_buttons\/custom_1.png\" title=\"Buy On Amazon\" \/>\n    <\/a>                        <\/div>\n                    <\/div>\n                <\/div>\n                <!-- description -->\n\n            <\/div>\n            <!-- \/.azp-product-content -->\n\n        <\/div>\n        <!-- \/.azp-each--product -->\n                <\/div>\n<!-- \/.azp-product-area -->\n\n\n\n\n<p>The PavaVise 350 comes with all you need to work on any kind of board: it opens a full 9 inches wide, and comes with the base and tray already.<\/p>\n\n\n\n<p>It&#8217;s not that heavy, but it&#8217;s pretty stable given that the circuit is centered over the base. The base tray itself is drilled so it can also be mounted like the PanaVise Junior. <\/p>\n\n\n\n<p>On the other hand, there are many more options you can purchase for this base such as the <a href=\"https:\/\/amzn.to\/324eoLY\">PanaVise 371 Solder Station<\/a> to turn it into a complete soldering station.There are also third-party accessories such as the <a href=\"https:\/\/amzn.to\/33Yt4hE\">QuadHands Flex Plus<\/a> to add helping hands to the base and make it even more versatile.                                                                                                 <\/p>\n\n\n\n<h2>Recommendations<\/h2>\n\n\n\n<p>All of those tools can have their place on your workbench depending how you like to work, and all of them will be a great step up from the standard helping hands when soldering boards.<\/p>\n\n\n\n<p>For the kind of circuits I build, the best soldering helping hands are the <a href=\"https:\/\/amzn.to\/2Hr7tVc\">PanaVise 350 Multi-Purpose Work Center<\/a> or the smaller model <a href=\"https:\/\/amzn.to\/2KVTWqT\">PanaVise Model 201 &#8220;Junior&#8221; Miniature Vise<\/a> are a good option to hold the board for you and free you up to work on it. It&#8217;s easy to rotate and adjust to work at different angles and have stable bases, and they work with both small PCBs and various kinds of parts.<\/p>\n\n\n\n<p>For a tool that can handle other tasks like holding two wires close together, the <a href=\"https:\/\/amzn.to\/2Ztv2mK\">QuadHands WorkBench Helping Hands<\/a> is also a great choice<strong>.<\/strong> You can also purchase the <a href=\"https:\/\/amzn.to\/33Yt4hE\">QuadHands Flex Plus<\/a> with the Panavise work center and have both!<\/p>\n","protected":false},"excerpt":{"rendered":"<p>I hope that the products recommended here will help you build great projects. Just so you know, if you buy through the links on this page on Amazon or Banggood (among others), RobotsBench may get a small share of the sale (as an Amazon affilate, I earn from qualifying purchases). This helps to keep the &#8230; <a title=\"Best Soldering Helping Hands (and other circuit board holders)\" class=\"read-more\" href=\"https:\/\/robotsbench.com\/best-soldering-helping-hands-and-other-circuit-board-holders\/\">Read more<span class=\"screen-reader-text\">Best Soldering Helping Hands (and other circuit board holders)<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":644,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_robots_primary_cat":"none","_seopress_titles_title":"","_seopress_titles_desc":"The PanaVise 350 Multi-Purpose Work Center is a great step up the standard helping hands for soldering circuit boards and will hold PCB of most sizes. On the other hand, if you want a tool that can also handle other tasks like holding two wires close together, the QuadHands WorkBench Helping Hands is the best option.","_seopress_robots_index":"","inline_featured_image":false},"categories":[3,108],"tags":[50,53,54,49,55,52,57,51,56],"featured_image_urls":{"full":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920.jpg",1920,1280,false],"thumbnail":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920-150x150.jpg",150,150,true],"medium":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920-300x200.jpg",300,200,true],"medium_large":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920-768x512.jpg",768,512,true],"large":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920-1024x683.jpg",1024,683,true],"1536x1536":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920.jpg",1536,1024,false],"2048x2048":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920.jpg",1920,1280,false]},"post_excerpt_stackable":"<p>I hope that the products recommended here will help you build great projects. Just so you know, if you buy through the links on this page on Amazon or Banggood (among others), RobotsBench may get a small share of the sale (as an Amazon affilate, I earn from qualifying purchases). This helps to keep the site alive and allow me to write more articles. Thank you! TLDR; The PanaVise 350 Multi-Purpose Work Center is a great step up the traditional helping hands for soldering circuit boards and will hold PCB of most sizes. On the other hand, if you want&hellip;<\/p>\n","category_list":"<a href=\"https:\/\/robotsbench.com\/category\/electronics-tools\/\" rel=\"category tag\">Electronics Tools<\/a>, <a href=\"https:\/\/robotsbench.com\/category\/products\/\" rel=\"category tag\">Products<\/a>","author_info":{"name":"Cindy","url":"https:\/\/robotsbench.com\/author\/cindyptn\/"},"comments_num":"0 comments","featured_image_urls_v2":{"full":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920.jpg",1920,1280,false],"thumbnail":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920-150x150.jpg",150,150,true],"medium":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920-300x200.jpg",300,200,true],"medium_large":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920-768x512.jpg",768,512,true],"large":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920-1024x683.jpg",1024,683,true],"1536x1536":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920.jpg",1536,1024,false],"2048x2048":["https:\/\/robotsbench.com\/wp-content\/uploads\/2019\/08\/solder-1038522_1920.jpg",1920,1280,false]},"post_excerpt_stackable_v2":"<p>I hope that the products recommended here will help you build great projects. Just so you know, if you buy through the links on this page on Amazon or Banggood (among others), RobotsBench may get a small share of the sale (as an Amazon affilate, I earn from qualifying purchases). This helps to keep the site alive and allow me to write more articles. Thank you! TLDR; The PanaVise 350 Multi-Purpose Work Center is a great step up the traditional helping hands for soldering circuit boards and will hold PCB of most sizes. On the other hand, if you want&hellip;<\/p>\n","category_list_v2":"<a href=\"https:\/\/robotsbench.com\/category\/electronics-tools\/\" rel=\"category tag\">Electronics Tools<\/a>, <a href=\"https:\/\/robotsbench.com\/category\/products\/\" rel=\"category tag\">Products<\/a>","author_info_v2":{"name":"Cindy","url":"https:\/\/robotsbench.com\/author\/cindyptn\/"},"comments_num_v2":"0 comments","_links":{"self":[{"href":"https:\/\/robotsbench.com\/wp-json\/wp\/v2\/posts\/483"}],"collection":[{"href":"https:\/\/robotsbench.com\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/robotsbench.com\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/robotsbench.com\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/robotsbench.com\/wp-json\/wp\/v2\/comments?post=483"}],"version-history":[{"count":13,"href":"https:\/\/robotsbench.com\/wp-json\/wp\/v2\/posts\/483\/revisions"}],"predecessor-version":[{"id":1160,"href":"https:\/\/robotsbench.com\/wp-json\/wp\/v2\/posts\/483\/revisions\/1160"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/robotsbench.com\/wp-json\/wp\/v2\/media\/644"}],"wp:attachment":[{"href":"https:\/\/robotsbench.com\/wp-json\/wp\/v2\/media?parent=483"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/robotsbench.com\/wp-json\/wp\/v2\/categories?post=483"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/robotsbench.com\/wp-json\/wp\/v2\/tags?post=483"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}